Automatic filling machine is composed of industrial control machine, cylinder actuator and weighing module, which is mainly used for monitoring the assembly line process device and related data management and filling to ensure that the equipment to complete the expected operation, and its main function is to realize accurate measurement of product materials. Realize intelligent filling process management control. Establishment of software serving the automated process control using computer recognition technology, printing technology, automatic control technology, information technology, the formation of intelligent automatic filling, to meet customer requirements for the filling process automation, information technology, intelligent.

Weighing and filling machine when the liquid level in the storage tank in the lower liquid level (lower limit value) and below, the float pressure plate detached from the mechanical valve and pneumatic butterfly valve open, through the inlet to the storage tank to transport liquid materials, with the liquid level rising, the float assembly according to the direction of the arrow to rotate, when the liquid level in the storage tank to reach the upper liquid level (upper limit value), the float pressure plate pressure down the mechanical valve contact and the pneumatic butterfly valve closes, to stop to the When the liquid level in the liquid tank reaches the upper level (upper limit value), the floating ball pressure plate presses down the mechanical valve contact and the pneumatic butterfly valve to close, stopping the delivery of liquid materials to the liquid tank. The filling system is controlled by pneumatic valve, mechanical valve and pneumatic butterfly valve.

Explosion-proof filling machine adopts embedded real-time operating system with perfect multi-task management function, reads the data sent by weighing module and converts them into corresponding filling messages. It realizes the function of sending and receiving the data from the communication module, including the function of sending the record of filling information, and analyzing the data and commands from the base station. It consists of main conveyor, secondary conveyor, filling system, secondary pushing device, photoelectric sensor (positioning), weighing module and so on. Liquid real-time monitoring, detected by sensors. Starting and stopping of motor, filling of weighing system, detection, pushing and counting of secondary products are controlled by PLC.

The manual filling scale collects the set value of filling through AD; Then, open the relay, motor operation to collect the sensor pulse number and real-time display on the liquid crystal, when the pulse number of the corresponding filling amount reaches the set value, close the relay to cut off the motor drive circuit. In the quantitative filling control circuit, the contact switch of the filling gun solenoid valve is kept normally closed, and the weighing module displays the current filling amount.

The automatic liquid filling machine uses high precision stainless steel rotor pumps to measure the liquid volume, each pump is driven by a servo motor and the filling volume can be adjusted directly on the touch screen. The valves are driven by servo motors for lifting and lowering, and the bottom-up screw drive can be used for filling foamy liquids. Determined by time and flow rate per unit time, determined by programmable logic controller (PLC) control, the operating status is monitored through the human-machine interface-touch screen, and the operating parameters can be modified online.

The liquid filling machine is controlled, self-corrected and statistically accomplished by an electronic scale and the filling gun has programmable positioning adapted to the product characteristics. It consists of filling gun, filling barrel, synchronized motor, rodless cylinder and roller arm. The correctness of the execution of the automatic filling machine is ensured by means of checking and confirming the command information of the feeding process, the filling process, and the constraints of material and container code identification.

The automatic filling machine adopts a number of core patented technologies, such as machine vision dynamic target recognition technology, intelligent filling process control and detection technology, composite explosion-proof technology, fault self-diagnosis and self-processing technology, Internet of Things (IOT)-based leakage detection technology, and so on; the products are all characterized by advanced technology, excellent quality, safety and environmental protection.

Weighing and filling machine consists of separated visual de-embossing robot, separated visual blocking robot, and double-station visual addressing filling machine, which has the functions of automatic de-embossing, filling, metering, blocking, self-diagnostic, self-testing, self-detection, self-inductive, remote monitoring, composite anti-explosion, and on-line visualization. Adopting advanced visual addressing technology, it is suitable for occasions requiring large quantities of continuous and fully automatic filling. Optional extensions and combinations with other systems ensure individual adaptability.

Automatic filling machine adopts new carbon dioxide blowing process, reduce carbon dioxide consumption, reduce oxygen pickup, filling display material amount, operation status, various alarm instructions, each filling amount, according to the process requirements of uniform settings, can be collected and processed by each filling control circuit to weighing signals and switching status, to realize the entire filling system feeding, weighing and detection, material adjustment, selection and switching of containers, such as dosing Automatic control of the process.