The weighing conveyor utilizes a load cell, a weighing controller, and an inlet and outlet conveyor. The load cell is used to collect the weight signal and send it to the controller for processing. The in-feed conveyor is used to provide adequate spacing between the products by means of speed. The outfeed conveyor is used to transport the finished product out of the weighing area. When the controller gets the weight signal of the product, the system will compare it with the pre-set weight range and sort the product, the sorting type will be different according to the application.

The Weigh Conveyor is a fully automated Weighing system for volume measurement, barcode measurement, and handling processing. With a capacity of 10,000 parcels per hour, this weighing system is ideal for high speed applications. The weighing system has a large dimensional measurement range and processing efficiency, which enables parcels to be counted and provides data for correct sorting. The weighing conveyor is a modular system that can be flexibly configured to meet different user requirements. The weighing conveyor is used to measure regular shaped objects transported on a raceway and is mounted above the raceway without the need to separate the conveyor belts. the raceway can be bi-directional and the front and back of the objects can be placed against each other to pass through the measuring head, increasing the total throughput. the TLX is a high speed solution that can be used effectively to reduce costs. Flexible combination of barcode scanning and weighing equipment. The system can be configured with dynamic weighing, packet pulling, unloading systems, scanning, and automatic sorting systems.