The fully automatic mixer adopts an industrial computer with high protection level as the main control computer of the system, and a special filter screen is used in the computer ventilation and heat dissipation system, which can be cleaned or replaced regularly and can effectively remove the influence of dust in the air on the equipment. The weighing system is input into the computer system through the man-machine interface or computer network, and the computer control system automatically calculates the supply ratio of each raw material according to the detection data and the process formula, and then the PLC control system synthesizes the supply speed of each raw material supply system to accurately and continuously complete the raw material ratio according to the process sequence.
020-34563445Automatic Dosage system (automatic mixer) for rubber, plastics, food, feed, pharmaceutical and other industries, intelligent automatic high-precision material (granular, powder, flake) metering system; the system adopts electromagnetic vibration, double (single) spiral feeding and other feeding methods and continuous stepless speed control device, multiple screws are set up individually, individually driven, shared automatic dosage and mixing system components.
The dosage system is composed of a set of PLC, touch screen and several accessories, which is connected to the computer through 485 communication to form a network, providing a convenient platform for the company's unified management. Dosing part of the main: powder tanks, auxiliary materials tanks, oil tanks, screw Feeder, screw mixer, weighing tanks, and a number of pneumatic/manual valves, etc.; automatic control part of the PLC and a set of touch-screen to control the site storage tanks of the low level of material signals, screw feeder alarm signals, feed valve/discharge valve level signals, mixing machine start signals or the site of the manual discharge signals, etc. access to the PLC's input, weighing The signal of weighing module is inputted into PLC through A/D conversion module, and PLC will automatically control the whole batching and weighing process, data processing and alarm output through programming. The data parameters and operation of batching are controlled directly by touch screen interface. Through the 485 communication module and the computer into a network, the computer to monitor the system and data processing.
Key Features:
The automatic mixing machine realizes remote control and after-sales support to improve the management level.
Adopting high resolution Electronic scale and weighing display instrument, high weighing precision.
Multi-station simultaneous metering and dosing, continuous dosing capacity of 400-600 bags/shift, high production efficiency.
All key components are imported and joint venture brands, stable and reliable.
Fieldbus working system (i.e. setting PLC sub-station), automatically detects the operation situation, gives the alarm position and prompts the solution when there is an abnormality, which is convenient for overhauling and maintenance.
Rectangular circular transportation assembly line arrangement, open Chinese and English human-machine interface, multi-area display, monitoring and operation functions of the system operation process, easy to use.
Automatically detects system operation, gives alarm location and suggests solutions when abnormalities occur.
Low energy consumption design with safety chain protection measures to ensure energy saving and safety.
Optimize the design of dust recovery system, configure single machine bag filter, no dust flying and leakage, good operating environment, no waste of raw materials.
