The liquid filling machine will send the empty barrel to the filling position and align the barrel mouth with the spray gun mouth. When the detection spray gun is in place, the bottom valve will be opened and the nitrogen filling valve will start to fill the dry nitrogen into the barrel through the filling mouth, so that the air in the barrel will be replaced by nitrogen, and the drying of the inner wall of the barrel can be accelerated to ensure the safety of filling. When filling with nitrogen, it should be ensured that the air in the container is completely replaced, and the specific amount of nitrogen can be adjusted by the controller time.
020-34563445Liquid Filling machine through the pressure weighing module for the weight of the pickup, and will pick up the weight of the signal amplification, filtering, into the A/D converter for analog to digital conversion, and then sent to the microcontroller for signal analysis, processing, the results of which are output to the industrial control through the RS232C communication serial port, and at the same time, according to the results of the signal to make the appropriate response and perform the corresponding operation. Filling system to SCADA filling as a platform, the secondary development of filling functions on this platform, to achieve intelligent filling process management and control. The establishment of software serving automated process control uses computer recognition technology, printing technology, automatic control technology, information technology to form intelligent automatic filling to meet the customer's requirements for the filling process automation, informationization and intelligence.
Automatic filling machine in accordance with the batch of work orders for the implementation of the S88 standard for the design of the program, liquid filling running process, the implementation, pause, cancel, end, stop the process and the state, are running in the process of an executive batch, to ensure that the implementation of work orders in the process of the integrity of the batch. With the function of flexible definition process. Through the interface of the process process selection, configuration of their own needs of the filling process.
Basic parameters:
Maximum weighing capacity: 30kg
Minimum Sensitivity: 0.1kg
Filling error: ±0.1-0.2kg
Filling speed: 20L about 1500-1800 barrels/hour
Control mode: 2-speed control
Filling method: insertion type, liquid level up
Gun head line: Teflon gun head, valve + Teflon hose
Structure material: Liquid filling machine host SUS304 stainless steel, conveying palletizing carbon steel anticorrosion paint.
Weighing platform size: 400 × 800mm (304 stainless steel power raceway)
Empty barrel raceway: 400mm × 2500mm (304 stainless steel power raceway) with another 1200mm slope without power roller
Heavy drum raceway: 400mm×2500mm (304 stainless steel power raceway, 2 sets)
Separate barrel device: for 20L barrels, carbon steel anticorrosive paint structure, 304 stainless steel raceway.
Palletizing equipment: pan-transfer type, suitable for pallets 1200×1200×140mm, including supplying pallets, palletizing, and lower pallet conveying.
Pipe pressure: 0.2-0.6MPa (related to material properties).
Material interface: DN40 flange connector 4, according to the user to provide interface standards
Air Connection: User supplied 12mm air hose connector for quick coupling connection
Power supply: AC220/50Hz (user-supplied to one side of the machine)
Using air source: 0.4-0.8Mpa (provided by the user to the side of the machine)
Use temperature: -10℃-50℃
Basic conditions: horizontal solid concrete floor, concrete thickness should be more than 10 cm.
optional models: standard, explosion-proof filling scale
