After the reaction pot Weighing system is started, PLC will automatically control the sequence of opening the pneumatic valve of each raw material and weighing feeding valve, and start the feeding motor at the same time of stirring the reaction pot weighing system, and close the feeding valve and motor automatically at the end of feeding, and then open the unloading valve and stirring motor of the reaction pot, the raw material will begin to unload, and then start to stir the reaction pot, and at the end of stirring of the reaction pot, the weighing system will open the unloading valve of the reaction pot and the unloading motor, and then transfer the finished material to the finished product tank, and this batching process is completed. The weighing system opens the unloading valve of the reactor and the unloading motor, and conveys the finished material to the finished product tank. Filling workers can start the Filling machine and carry out the operation of filling barrels. The dosing process of the reaction pot can also be operated manually by the operator according to the process requirements by pressing the valve and motor buttons on the operating table in manual sequence to carry out manual dosing process operation.

Reaction tanks can be installed on the static level meter (such as radar level meter, ultrasonic level meter, float level meter, pressure level meter, etc.), at any time to detect changes in liquid level, the control system in time to track the collection of liquid level height data, and measurement and calculation of raw material inventory, feed, discharge, etc., to generate data reports, to facilitate the raw material inventory and consumption, such as the management of explosion-proof Electronic scales.

Reaction tank weighing system is to be two or more materials according to a certain weight ratio automatically quantitatively added to the mixing and dosing tank, after mixing to meet the predetermined requirements of the process of automatic discharge. The main hardware of the whole batching control consists of two computers, high-performance micro-weighing controllers, human-machine interface, high-speed and high-precision weighing units and international famous low-voltage electrical appliances, combined with self-developed professional control software to realize the automation control of production. Under the drive of motor, the material is sent out to the metering tank, the electrical signal representing weight generated by weighing module and weighing instrument is amplified by signal amplifier module, and then collected by PLC and computer, when it reaches the predetermined weight, PLC drives the motor to open the pneumatic valve of the metering tank, and the material enters into the kettle, and at the same time, it starts the stirring motor, and the material is discharged from the discharge port after the stirring reaches the specified time, and the dosing process is completed once.