The automatic Filling machine reads the internal state of weighing instrument and real-time data of quantitative filling in real time and displays the data on the upper computer with report function, which can generate daily report, real time report, monthly report, annual report and so on. Dynamic addition and modification of the reports, by setting the permissions to give the technicians or operators the right to modify and add the filling forms, while recording the date of modification and the number of operators. Power failure recovery function: in case of sudden power failure, the measurement records before power failure can be recovered; LAN sharing function, the host computer can share data in LAN, which is convenient for workshop supervisors to know about the progress of works and so on.

Under the premise of time and filling volume set by the Filling system, in order to ensure the filling speed, the material is transformed from fast feeding to slow feeding, due to the large changes in the amount of material, the material will have an impact on the weighing hopper and vibration, the larger the flow of fast feeding, the more obvious the impact of vibration, the sampling result is compared with the set weight, and the weighing instrument will be treated as a set weight signal and abort the slow feeding early, when the maximal amplitude of the weighing hopper is smaller than that of the system setting. When the maximum amplitude of the weighing hopper is less than the set weight, the weighing instrument will take it as the set weight signal and abort the slow dosing in advance, and the material gun will be closed automatically when the dosing volume reaches the target value.

Liquid filling machine using air inlet speed control, the purpose is to use the imported throttle speed control, speed control valve installed near the cylinder, the average speed of the piston is low, fluctuations are small, in the entire stroke, the piston speed gradually increased; cylinder inflation pressure rises slowly, to reach the gas source pressure is also slow, with the valve 1 and valve 2 spool adjusted to a suitable number of laps, on the kind of fast refilling to ensure that the piston rod extends the cylinder fast, slow return, thus reaching the Control the opening and closing speed of the fast charging material door.

Basic parameters:

Maximum weighing capacity: 300kg.

Minimum sensing capacity: 0.1kg.

Filling error: ±0.1-0.2kg.

Filling speed: about 50-80 barrels/hour.

Control: 2-speed control.

Filling method: Insertion type, liquid level up.

Gun head line: Teflon gun head, valve + Teflon hose.

Structure material: liquid filling machine host SUS304 stainless steel, conveying palletizing carbon steel anticorrosion paint.

Weighing platform size: 800 × 800mm (304 stainless steel power raceway)

Empty drum raceway: 800mm×2500mm (304 stainless steel power raceway) with another 1200mm slope unpowered roller.

Heavy drum raceway: 800mm x 2500mm (304 stainless steel power raceway, 2 sets).

Separate barrel device: for 200L barrels, carbon steel anticorrosive paint structure, 304 stainless steel raceway.

Palletizing equipment: pan-transfer type, suitable for pallets 1200×1200×140mm, including supplying pallets, palletizing, and lower pallet conveying.

Pipe pressure: 0.2-0.6MPa (related to material properties).

Material interface: 4 DN40 flange connectors, interface standards can be provided according to the user.

Air Connection: User supplied 12mm air hose connector for quick coupling connection.

Power supply used: AC220/50Hz (user supplied to one side of the machine).

Using air source: 0.4-0.8Mpa (provided by the user to the side of the machine).

Use temperature: -10℃-50℃.

Base condition: Ammonia solution flat solid concrete floor, concrete thickness should be more than 10cm.

Optional models: standard, explosion-proof filling.