The Filling system is set up in two modes of operation, i.e. white motion and manual. In automatic mode, after starting the system, the motor automatically starts to run to drive the conveyor running work until the stop switch is activated then the motor stops running. Alternatively, when the weighing module detects that a bottle has stopped on the production line and is in the filling state, the conveyor stops running, and the conveyor automatically resumes running after the bottle has been filled until the next stop signal is received, and so on. In manual operation mode, the system is controlled by a switch. Turning on the switch starts the system, the bottle reaches the filling position and the system stops. When the start switch is released and the filling switch is pressed, the filling action is initiated and the timer starts to work to control the time of filling and the filling stops when the time is reached. Pressing the system start switch here, the system turns on the operation mode.

Filling system is equipped with an alarm device, when the system malfunctions or there are abnormalities will be sent to the PLC fault signal, PLC to start the alarm program by the alarm device in the form of sound and light alarm signals.

Technical Parameters

Weighing range: ≤1200kg

Filling index: 0.1kg

Filling precision: ≤±0.2kg

Filling speed: 4-6 cans/hour

Tank specification: ≤φ600xh950

Power supply: AC380V±10%50hz

Using gas source: 0.5MPa