The inspection machine enters the sorting scale neatly and equally spaced through the introduction conveyor and starts to measure the product when it passes the photoelectric sensor located at the front of the scale. As the product passes through the weighing conveyor, the weighing module of the weighing component measures the product and displays the data to the operator. The computer automatically compares the displayed measurement data with the pre-set standard weight values, upper and lower limits and carries out the identification and sorting of overweight and underweight products.

The whole process does not interrupt the normal work of the product line without manual intervention. When the weight of the packages running from the conveyor to the weighing conveyor table reaches the weight trigger point after the set number of invalid ADs, the instrument digitally filters the collected number of valid ADs and then averages them when the number of valid ADs reaches the set value to calculate the weight of the detected material. The instrument compares this weight with the set standard value to determine which zone the detected object belongs to and whether to reject it. When the detected object leaves the scale, the automatic zero tracking starts working until the next item enters the scale.

Technical Parameters

Sorting range: 4.0~300.0g (600.0g also available)

Sorting speed: Max. 60 times/minute

Sorting accuracy: ±0.2g

Minimum display: 0.1g

Sorting object (length 20~100mm) (width 20~100mm) (height 5mm or more)

Power supply: AC110/220V,50/60HZ)

Use temperature: 0℃~35℃