Automatic distribution machine to achieve all signal acquisition, calculation, regulation, respectively: temperature control, traction control, pressure control and auxiliary control of the local unit, mainly installed WinAC adapter and unit status monitoring, process data access, unit automatic filling control, and shop level process control server and production planning server connected.
020-34563445Automatic Filling machine for the explosion-proof environment of the packaging and the design of intelligent packaging system, by the automatic sliding door, automatic search for the mouth positioning, automatic opening, automatic filling, automatic nitrogen filling, automatic capping, automatic cap tight cap composition, before and after the filling room with automatic barrier door. The Filling system is located in the filling room, and the external VOC exhaust ducts of the owner keep it in the state of micro-negative pressure to avoid the escape of waste gas. Setting up 2 sets of independent structure of material filling gun head system, one for use and one for backup, can start one set of filling gun filling according to the instruction, so as to realize the function of independent filling. Adopt vision system to locate, control system according to the barrel mouth position parameters through the servo moving system to make the designated filling guns arrive at the barrel mouth position one by one, automatically complete the open cap, filling, nitrogen filling, capping different materials are used in their own independent filling system, to avoid cross contamination.
Weighing and distributing machine to the field equipment related analog and switching data state acquisition and output control, touch screen and metering tank PLC supporting the use of liquid distribution tank PLC makes the application of more flexible. The touch screen can set parameters, display data and depict the production process in the form of animation, which makes the application of PLC visualized. The dispensing system uses RS232 interface to connect the touch screen and PLC through communication cable. Remote touch screen (HMIA) and local touch screen (HMIB) are connected through Ethernet, both of which can display meter data and equipment status, and both of which can control the filling machine. The upper computer monitoring system can not only complete the configuration and debugging of the Weighing system, online correction of detection parameters and setting of control parameters, but also realize the collection of production data, report generation and printing, alarm of abnormal signals and network distribution of production site information. By using the web function of Configuration King 6.53, the upper monitoring computer also acts as the web server of the weighing system, and the Configuration King project can complete the web publishing through the web server. Remote monitoring is connected to the site via Ethernet, so that the operator can monitor the weighing system remotely anytime and anywhere via Ethernet and IE browser.
Basic parameters:
Maximum weighing capacity: 300kg
Minimum Sensitivity: 0.1kg
Filling error: ±0.1-0.2kg
Filling speed: about 50-80 barrels/hour
Control mode: 2-speed control
Filling method: Insertion, liquid level up
Gun head line: Teflon gun head, valve + Teflon hose
Structure material: host SUS304 stainless steel, conveying palletizing carbon steel anticorrosion paint.
Weighing platform size: 800 × 800mm (304 stainless steel power raceway)
Empty barrel raceway: 800mm × 2500mm (304 stainless steel power raceway) with another 1200mm slope without power roller
Heavy drum raceway: 800mm×2500mm (304 stainless steel power raceway, 2 sets)
Separate barrel device: for 200L barrels, carbon steel anticorrosive paint structure, 304 stainless steel raceway.
Palletizing equipment: pan-transfer type, suitable for pallets 1200×1200×140mm, including supplying pallets, palletizing, and lower pallet conveying.
Pipe pressure: 0.2-0.6MPa (related to material properties).
Material interface: DN40 flange connector 4, according to the user to provide interface standards
Air Connection: User supplied 12mm air hose connector for quick coupling connection
Power supply: AC220/50Hz (user-supplied to one side of the machine)
Using air source: 0.4-0.8Mpa (provided by the user to the side of the machine)
Use temperature: -10℃-50℃
Base condition: Ammonia solution flat solid concrete floor, concrete thickness should be more than 10cm.
Optional models: standard, explosion-proof filling
