Automatic Filling machine uses the working principle of multi-head weighing to realize the control of filling quantity, the material flows into the container to be filled by itself (or through the pump feeding and conveying), through the thick and thin multi-pipes to realize the fast and slow filling, the filling flow rate can be adjusted. At the beginning of filling double pipeline open at the same time, to be filled to the fast filling set amount, the coarse pipeline closed, the fine pipeline continues to slow filling, until the set amount of the overall filling.

The weighing and distributing machine can adjust the size of the filling volume by changing the speed of the gear of the frequency converter, the pulse signal of the Filling system dispenses the liquid to the filling container through the filling valve, controls the switching on and off of the solenoid valve, drives the actuating lever drive to make the conical spool in the filling valve open or close, realizes the intermittent opening and closing of the liquid circuit, and shows the whole filling control process of the weighing and distributing system. The filling machine consists of stepping motor, gear pump filling head, conveyor belt and electrical control box, the electrical part mainly includes stepping motor drive power supply, positioning solenoid valve, counter, cylinder filling head, conveyor motor and the corresponding control circuits, the filling machine through the variable speed deceleration to stay installed E stepping motor output shaft and the ruler wheel pump drive shaft connected, the stepping motor can not only serve as a power source of the filling liquid, but also by the The stepper motor can be used as the power source of filling liquid, and can be used to control the number of running steps of the stepper motor to achieve precise control of the gear pump's revolutions so as to realize the purpose of precise metering.

Basic parameters:

Maximum weighing capacity: 30kg

Minimum Sensitivity: 0.1kg

Filling error: ±0.1-0.2kg

Filling speed: 20L about 1500-1800 barrels/hour

Control mode: 2-speed control

Filling method: Insertion, liquid level up

Gun head line: Teflon gun head, valve + Teflon hose

Structure material: host SUS304 stainless steel, conveying palletizing carbon steel anticorrosion paint.

Weighing platform size: 400 × 800mm (304 stainless steel power raceway)

Empty barrel raceway: 400mm × 2500mm (304 stainless steel power raceway) with another 1200mm slope without power roller

Heavy drum raceway: 400mm×2500mm (304 stainless steel power raceway, 2 sets)

Separate barrel device: for 20L barrels, carbon steel anticorrosive paint structure, 304 stainless steel raceway.

Palletizing equipment: pan-transfer type, suitable for pallets 1200×1200×140mm, including supplying pallets, palletizing, and lower pallet conveying.

Pipe pressure: 0.2-0.6MPa (related to material properties).

Material interface: DN40 flange connector 4, according to the user to provide interface standards

Air Connection: User supplied 12mm air hose connector for quick coupling connection

Power supply: AC220/50Hz (user-supplied to one side of the machine)

Using air source: 0.4-0.8Mpa (provided by the user to the side of the machine)

Use temperature: -10℃-50℃

Base condition: Horizontal solid concrete floor, concrete thickness should be more than 10cm.

Optional models: standard, explosion-proof filling scale