The essence tank is controlled by PLC programmable device, the electric drum of the scale body runs simultaneously when the container is sent in, the photoelectric switch on the weighing module detects the signal sent by the passing container, controls the signal sent by the motor when the container reaches the filling position, the electric rolling is stopped by PLC and the skin is automatically peeled, and the filling valve is driven by the stepping motor to lower limit. The well is signaled by the travel switch, and the PLC controls the filling valve to be fully opened for filling.
020-34563445The automatic Filling machine drives a piston through the cylinder to draw and play the material with a check valve to control the material flow direction, uses a magnetic spring switch to control the stroke of the cylinder to adjust the filling amount, uses the weighing module to connect with the data line of the weighing instrument, and continuously transmits the pressure signal of the Electronic scale to the weighing instrument during the measurement process. When the preset quantitative weight is reached, the weighing instrument controls the pump and closes the pneumatic valve.
The weighing and filling machine is controlled by a PLC programmable device, the electric drum of the scale body runs simultaneously when the container is sent in, the photoelectric switch on the metering module detects the signal sent by the passing container, controls the signal sent by the motor when the container reaches the filling position, and the electric rolling is stopped by the PLC and the skin is automatically peeled, and the filling valve is driven by the stepping motor to lower limit. The well is signaled by the travel switch, and the PLC controls the filling valve to be fully opened for filling.
When the set value is reached, the solenoid valve acts, the filling valve is half-opened for filling, and at the same time, the stepper motor drives the filling valve to rise through the lead screw at the pre-set speed. When the filling requirement is reached, the filling valve closes, and the filling valve reaches the upper limit, the stroke switch stops and sends a signal. PLC controls the electric rolling of the motor scale body at the same time, and the finished product is output, and then the container is put into the electronic scale platform, the barrel mouth is aligned with the filling mouth, at this time the program starts, the filling nozzle will automatically drop, the filling valve will be opened to feed, and the filling nozzle will automatically stop when the set amount is reached, and the filling nozzle will rise to complete the filling process.
