Weighing loaders use microcontrollers for simple weighing accumulation and PID regulation, which are simple, with low dosage control accuracy, weak management functions and low reliability. Larger companies usually use the regulator and WINDOWS platform based on the Loading machine, the system works normally, the weighing instrument accepts the weighing signal from the scale and the speed signal, and displays the instantaneous flow rate and the cumulative amount after the calculation, and the instantaneous flow rate in the form of 4 ~ 20 mA analog current to the PID regulator as the regulator measurement input signal, the regulator will be set with the signal and the machine set value The regulator will compare the signal with the set value in the machine and output a 4-20 mA analog signal to control the speed of the feed motor, weighing mixer to further control the material flow, and ultimately make several kinds of coal instantaneous flow and the cumulative amount of the stage are kept within the range of user requirements. Weighing mixer to change the flow and proportion can be set directly on the regulator operation, the operation is simple and convenient. Weighing Feeder applicable to the above solution process site must first meet the prerequisite that the amount of material given must be directly proportional to the speed of the feed control motor.

Pneumatic conveying feeding system is a kind of unloading device for powder and powder filling materials, and its product structure consists of operation table, filter combination equipment, filter backblowing cleaning equipment, negative pressure fan equipment, belt separation equipment, storage equipment and so on. equipment and other key components. Based on this series, you can choose to install grinding equipment, vibrating screen, iron removal device and tipping bucket support. Feeding stations can be used in a variety of situations. With the ability to reduce the feeding dust, equipped with vibrating screen, it can effectively filter out the foreign matter, prevent dust scattering, improve people's working environment, and improve the health of workers to some extent.

Pneumatic conveying feeding systems are more frequently used in the same loading stage as mixers and packers. Support for integrated feeding operation and feeding operation, feeding device is equipped with an independent dust removal system, through the dust produced by the upper part of the dust blower to collect dust ash, using a special anti-blow system, greatly extending the service life of the filter, completely save the cost of consumables for your equipment. The equipment station is simple, easy to operate, various specifications of the bag mouth feeding station can meet the requirements of a variety of processing volume, to achieve the fully closed open bag feeding and pipeline transport.

Product Features.

1) The pneumatic conveying feeding station is made of stainless steel and conforms to GMP standard.

2) Automatic control, set the time of supplying and discharging material arbitrarily within 0-30 seconds. This is relatively easy and convenient to operate.

3) Since the whole process adopts airtight transportation, there will be no dust leakage and no impact on the environment.

4) Small footprint, lightweight equipment, easy to install and ready to use.

5) Pneumatic conveying feeding station runs with low vibration and low noise.

6) Dust-free operation, modular design, dead-end rapid material replacement, disassembly and cleaning.

7) The equipment is equipped with high-efficiency dust removal device, which is more convenient for maintenance and can be connected to the centralized dust removal system.

8) The equipment can be equipped with a garbage bag recycling system, mainly for garbage bag recycling.