Weighing and batching machine to achieve automatic metering and mixing process, weighing sensor in the batching equipment is mainly used to detect the weight change of the material in the hopper, through the weight change to achieve automatic metering and the change of the material batching bucket in the hopper, so as to ensure the batching and mixing accuracy of different particles and powder materials. Through the automated continuous metering process, the equipment realizes the automation and precision metering of the material formula, and also ensures the consistency and uniformity of the mixing. In order to ensure the accuracy, effectiveness and stability of the mixture, the batching control system needs to formulate relevant control strategies according to the process parameters, equipment characteristics and material attributes, so as to achieve the standardization and standardization of automated production. The batching mainly completes the data collection of various parameters in the whole process of raw pulp batching, the start, stop and interlock of the control equipment, the screen display of the operation status of the equipment and the process flow, the fault alarm, the historical trend chart and the print-out of various reports; According to the analysis results of the analyzer and the data collected by the computer monitoring and control, the ratio calculation results are sent to the spiral scale and control system to adjust the dosage.

The weighing Feeder is composed of measuring module, microprocessor control module, driving motor, weighing control system and actuator, etc. Its working process mainly includes weighing, measuring, mixing and unloading steps. According to the preset ingredients and mixing ratio, the weight of different materials is measured by the precision ingredients, and the exchange and flipping of the raw material barrel is controlled by the changing mechanism, so as to control the adjustment of the formula proportion and the measurement accuracy of the actual ingredients. In the process of material feeding, because the density of the material is different, it is necessary to set their own weighing for different materials in the weighing process to achieve accurate measurement. According to the formula setting, the system automatically starts the motor, according to the established process parameters, the use of mixing mixer for mixing, mixing time and speed generally according to different material characteristics, specifications, adhesion and subsequent processing process requirements, to set different parameters. When the mixing time arrives, the system automatically disloads, and the mixed material is released through the discharge port to continue the production process of the next batch of material.